Ledj LEDJ352A User Manual page 10

DMX Signal Fail:
To access the DMX signal fail setting, press the "MENU" button and use the "UP" and "DOWN" buttons
FAiL
to show on the LED display. Now press the "ENTER" button and use the "UP" and "DOWN"
buttons to choose between
Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
Colour mix mode:
To access the colour mix mode, press the "MENU" button to show
Now press the "ENTER" button and use the "UP" and "DOWN" buttons to choose
Press the "ENTER" button and use the "UP" and "DOWN" buttons to select the brightness of Red
000 255
between ~
Now press the "ENTER" button and repeat for
ANbE Uv
Amber and
To exit out of any of the above options, press the "MENU" button.
Built-in programs:
To access the built-in programs, press the "MENU" button to show
Now press the "ENTER" button and use the "UP" and "DOWN" buttons to select one of the 5 built-in
programs (static colour, colour fade, auto, sound or strobe).
StAt
- Press the "ENTER" button and use the "UP" and "DOWN" buttons to select between
Co01 Co25
~ . Press the "ENTER" button to confirm the setting.
Co01
- Red
Co02
- Green
Co03
- Blue
Co04
- White
Co05
- Amber
FAdE
- Press the "ENTER" button and use the "UP" and "DOWN" buttons to select the fade program
FA01 FA05
between ~
the fade speed between
(01 = slow speed, 09 = fast speed).
AUto
- Press the "ENTER" button and use the "UP" and "DOWN" buttons to select the auto speed
SP01 SP09
between ~
(01 = slow speed, 09 = fast speed).
SoUn
- Press the "ENTER" button and use the "UP" and "DOWN" buttons to select the sound
SE01
sensitivity between
(01 = low sensitivity, 09 = high sensitivity).
www.prolight.co.uk
HoLd bLaC
(Hold),
. Value: 000 - 255 (000 = low, 255 = high).
UV. Press the "ENTER" button to confirm the setting.
Co06
- UV
Co07
- Cyan
Co08
- Magenta
Co09
- Yellow
Co10
- Purple
. Press the "ENTER" button and use the "UP" and "DOWN" buttons to select
SP01 SP09
. Press the "ENTER" button to confirm the setting.
~
. Press the "ENTER" button to confirm the setting.
SE09
~ . Press the "ENTER" button to confirm the setting.
AUto
(Blackout) or
CoLo
GrEE bLUE
Green,
ProG
Co11
- Orange
Co12
- Lime Green
Co13
- Lavender
Co14
- Yellow/Orange
Co15
- Pink
Rapid QB1 HEX User Manual
Operating instructions
(Auto mode).
on the LED display.
rEd
.
uHIt
Blue, White,
on the LED display.
Co16
- Light Blue
Co17 Co27
~
- White colour
temperature macros
10