Process Diagram And Valve Information - Vexve Hydrox HCU Remote Installation, Operation And Maintenance Instructions

Figure 13. Home screen
Process Screen
Valve Settings
Diagnostics
User Settings
Table 13 Home Screen Buttons

7.2.2. Process diagram and valve information

The process diagram provides the information about the major sensor values and status. There are four
types of indicators used in the Process Diagram page. The green box around the valve shows the select-
ed valve. The valve position is indicated using value indicators seen with the black dotted box in figure 14.
Each valve image acts as a button to activate valve information window. The valves can also be selected
using the function button under images V1 to V6 shown in Figure 14. Please note that the screen will be
different depending on which configuration has been acquired.
www.vexve.com
Shows indicators and sensor values with the valve selection
button. The valve can only be controlled from this screen. One
can also navigate to a valve specific page from this screen.
In this screen, you can change the valve control parameters.
This button takes you to the sub menu for motor diagnostics,
rack diagnostics, active alarms, old alarms and device informa-
tion screen
User settings page.
27