Notification Messages; Information Messages - Vexve Hydrox HCU Remote Installation, Operation And Maintenance Instructions

5.4.2. Notification messages

Notifications in the HCU Remote system are used to notify the user that an action has been completed.
Notifications require acknowledgment by the user. In a similar manner to the alarm message the acknowl-
edgement button must be pressed to remove the message window from the screen. Notifications in the
HCU Remote system are only available in Local and Remote (WebApp) operation. Table 9 shows the
existing notifications, their descriptions and their availability depending on the remote installation should it
apply.
Alarm Description
Opened Valve 1 Valve 1 has been opened
Closed Valve 1 Valve 1 has been closed
Opened Valve 2 Valve 2 has been opened
Closed Valve 2 Valve 2 has been closed
Opened Valve 3 Valve 3 has been opened
Closed Valve 3 Valve 3 has been closed
Valve 4 has been opened
Opened Valve 4
Closed Valve 4 Valve 4 has been closed
Opened Valve 5 Valve 5 has been opened
Closed Valve 5 Valve 5 has been closed
Opened Valve 6 Valve 6 has been opened
Closed Valve 6 Valve 6 has been closed
Table 9. Notification messages

5.4.3. Information messages

Information messages in the HCU Remote system are used to notify the user that an action they triggered
was completed. Unlike Notifications, Information messages do not require acknowledgement, they will
disappear on their own after a few seconds have elapsed. These messages are only used in the local
HMI. Table 10 lists the available messages.
Alarm Description
Curve values Curve values have been
saved to the PLC
saved
Curve default Default curve values have
values saved been loaded and saved.
Table 10. Information messages
www.vexve.com
Local Remote
(WebApp)
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
Local Remote
(WebApp)
X
X
Remote Remote
Modbus Physical
Remote Remote
Modbus Physical
19