Valve Selection; Opening The Valve - Vexve Hydrox HCU Remote Installation, Operation And Maintenance Instructions

5.2.1. Valve Selection

2
1
3
Figure 3. Generic UI
1
2
3
Table 5. Generic UI description
Element 3 as in table 5 can be either a representation of a physical function button to press, as it would
be in the case of the HMI, or an actual button to click on in the case of the WebApp. Clicking on either
option will select the valve and enable access to the open/close functions.

5.2.2. Opening the valve:

1. Once the valve is selected, press the OPEN button.
2. The pump starts to open the valve according to the configured operational behaviour curve
(see section 7.2.3).
3. The pump will automatically stop when the valve reaches the open position.
14
Element
Valve number
Valve representation
Valve button
www.vexve.com