Table of Contents
Advertisement
6 | Compressor assembly
A rule of thumb: Always lay the first pipe section starting from the shut-off valve downwards and
parallel to the drive shaft.
a)
As short as
possible
a) For HG44e a intermediate flange (height 27 mm) is optional available,
Art-Nr. 81194.
With this intermediate flange it is possible to lay the pressure line directly from
the valve to the left or right.
6.6 Operating the shut-off valves
Before opening or closing the shut-off valve, release the valve spindle seal by approx. ¼ of a turn
counter-clockwise.
After activating the shut-off valve, re-tighten the adjustable valve spindle seal clockwise.
Valve spindle seal
Fig. 7
Rigid
fixed point
Fig. 8
Fig. 6
Tighten
Release
D
GB
F
E
15
Advertisement
Table of Contents
