Table of Contents
Advertisement
6| Compressor assembly
A rule of thumb: Always lay the first pipe section starting from the shut-off valve downwards and
parallel to the drive shaft.
Rigid
fixed point
D
GB
6.6 Operating the shut-off valves
F
Before opening or closing the shut-off valve, release the valve spindle seal by approx. ¼ of a turn
E
counter-clockwise.
After activating the shut-off valve, re-tighten the adjustable valve spindle seal clockwise.
Fig. 7
14
As short as
possible
Valve spindle seal
Release
Fig. 8
Fig. 6
Tighten
Advertisement
Table of Contents
