Technical Specifications; Certification; Regulatory Compliance Statements; United States - 3Com Dual DSX-1 Getting Started Manual

A

Certification

Regulatory
Compliance
Statements
Interface
Specifications
T
ECHNICAL

United States

FCC Part 15 Compliance Statement

This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
2 RJ-48C connectors for T1 Network Interface Card (NIC) to terminate
T1 span lines
2 Bantam Monitor jacks for T1 NIC to monitor network signals
RS-232D modular 8 connector for configuration and software
download with a PC, terminal, or modem
180-pin DIN connector to chassis midplane
Menu-driven operator interface via the RS-232 port
S
PECIFICATIONS