Rangemaster Professional+ 110 Induction User's Manual & Installation Instructions page 26

Fig. 3.34
ArtNo.302-0002 - 6BC annotated
Fig. 3.36
ArtNo.302-0002 - 6BC annotated
Fig. 3.38
ArtNo.302-0002 - 6BC annotated
Fig. 3.40
ArtNo.302-0002 - 6BC annotated
Symbol Function
Sets the Minute Minder
[ ]

Sets the duration / cook
[ ]

period
Sets the end / stop cook
[ ]

time
Allows the time of day to
[ ]

or
be set when 'AUTO' is not
[ ] & [ ] active
 
Resets the cooking
[ ]

control to manual
[ - ]
Decreases time interval
[ + ]
Increases time interval
Clears all 'AUTO' and
[ + ] & [ - ]
minute minder programs
ArtNo.302-0002 - 6BC annotated
ArtNo.302-0002 - 6BC annotated
ArtNo.302-0002 - 6BC annotated
ArtNo.302-0002 - 6BC annotated
Notes
Used with the [+] and [-] buttons
Used with the [+] and [-] buttons
Used with the [+] and [-] buttons
Used with the [+] and [-] buttons
Holding this button down
allows a quick set
Holding this button down
allows a quick set
Table 3.2
Setting a Cook End Time
Fig. 3.35
Press and hold the 'stop time' [
press the [+] button (or [–] button) until the required 'stop
time' shows (Fig. 3.35). The [
in the display.
Once the 'stop time' is reached, the beeper sounds and the
[AUTO] symbol flashes. Turn the oven control knob to 0 and
then press any button to stop the beep. Press [
manual cooking.
Fig. 3.37
To Start and Stop the Ovens Automatically
Before you set the clock for automatic operation you must
have two numbers clearly in mind – the 'cook period' and the
'stop time' .
Note: You cannot set a start time directly – this is set
automatically by setting the 'cook period' and the 'stop time' .
Press and hold the [
Fig. 3.39
the [+] button (or [–] button) until the required 'cook period'
shows (Fig. 3.37).
Now press and hold the [
press the [+] button (or [–] button) until the required 'stop
time' shows (Fig. 3.39). Release the buttons.
[AUTO] will now show in the display (Fig. 3.40).
Set the oven(s) to the required temperature. When cooking
is finished [AUTO] will flash and the beeper will sound. Turn
Fig. 3.41
the oven knob(s) to the OFF position first, and then press any
button once to stop the beep; press the [
to manual cooking.
If you are out, do not worry about the beeper going off, it
stops after a while. When you return, turn the oven knob(s) to
0 first, and then press [
AUTO is Showing, You Want to Reset to Manual Cooking
To return to manual cooking mode from an Automatic
setting, simultaneously press the [+] and [-] key, this will clear
the automatic program and return to manual mode.
Please note that this action will also clear the [Minute Minder]
setting.
Beeper Tone Adjustment.
The beeper tone can be adjusted to three different levels.
Whilst in the time of day mode, press and hold the [-] button
for a period until the display shows the Tone Bars (Fig. 3.41).
Release the [-] button and immediately press again, this will
adjust the tone down by a bar. Continue the process until a
comfortable, tone is reached.
Please note, during a power reset the clock will remember the
last tone set.
For an overview of the functions refer to Table 3.2.
22
] button (Fig. 3.34) and then

] symbol and [AUTO] will show

] button (Fig. 3.36) and then press

] button (Fig. 3.38) and then

] button to return

] to return to manual cooking.

] to return to
