Printek PrintMaster 862 Operator's Manual page 70

S P E C I F I C A T I O N S
Line Length
8.5 inches.
Control Code And Escape Sequence Emulations
Genicom 3840
Genicom 3410
ANSI X3.64
Epson FX
IBM Proprinter
DEC LA-120 and LA-210
Simple TTY
Printek
Basic Bar Code
Paper Handling
Rear feed or optional bottom feed; zero tear off distance; paper out/paper jam detection; fan fold,
continuous forms, edged punched.
Paper width: 2.5 to 8.5 inches.
Paper Slew Rate: 6 inches per second rear feed, 6 or 12 inches per second bottom feed.
Ribbon
15,000,000 character, mobius loop cartridge.
Special Forms Handling Features
Print up to nine part forms (.025" maximum thickness)
Easy access to tractors.
Front panel and host form selection.
Automatic head gap.
Paper out sensing.
Paper motion sensing.
Page reprint.
Automatic path switching for same form in more than one path (with optional bottom feed unit).
Nonvolatile memory for ten form setups. Parameters for each form include: custom form name, tractor
path (only with optional bottom feed unit), cpi, left margin, right margin, lpi, form length, top margin,
bottom margin, font, character impact mode, language*, slashed or nonslashed zero, and unidirectional
printing.
Computer Interfaces
Centronics Compatible Parallel.
Asynchronous RS-232: 110 to 9,600 baud; Even, Odd, or No parity; 7 or 8 data bits; 1 or 2 stop bits;
XON/XOFF, ETX/ACK, and Hardware handshake.
Optional 10/100 BaseT Ethernet Interface
Input Buffer Size: 32K bytes.
64