Vmware Airwatch - HTC VIVE XR Elite User Manual

66 VIVE XR Elite for Business

VMware AirWatch

Setting up VMware AirWatch agent and enrolling VIVE XR Elite using a QR code
You can create and use a QR code to automatically set up Wi-Fi, install the VMware AirWatch
agent from a specified URL, and enroll VIVE XR Elite.
If the headset is currently enrolled or was enrolled to an MDM solution before, perform a
factory reset first. Then set up the headset. See
55 and Setting up your headset for the first time
1. In your computer's web browser, go to a website that can generate QR codes.
For example: https://www.the-qrcode-generator.com/
2. Configure your QR code with the following data:
§ Headset setup:
Parameter Description
wifi
url
oobe
extras
The download link for VMware AirWatch is
airwatchagent.apk. Make sure the URL is accessible before generating your QR code.
§ Wi-Fi settings:
Parameter
WIFI
S
P
I
§ Additional data:
You can include the following data as needed when automatically enrolling VIVE XR
Elite with the VMware AirWatch agent:
Resetting your headset (factory reset)
Wi-Fi configuration. For details, see the "Wi-Fi settings" table.
Download link for VMware AirWatch
Configuration for specifying what to include in the headset setup
process:
0: Include the complete setup process
1: Include only room setup and first-time controller setup
2: Skip the entire headset setup process
For details, see the "Additional data" table.
https://getwsone.com/mobileenrollment/
Description
Authentication type (for example: WPA2-EAP, WPA)
Network SSID
Network password
Identity
on page 15.
®
on page