Epson SureColor P6570 Series User Manual page 302

4. Select the color pairs with faint or missing segments in the check pattern, then select OK to start the
cleaning cycle.
Note: A typical head cleaning cycle takes about 4 to 10 minutes. The more color pairs selected, the
longer it takes to perform cleaning. Depending on the status of the nozzles and the Auto Clean Max
Repeat setting, this function can take up to 28 minutes.
When the cleaning cycle is finished, a confirmation screen appears.
Caution: Never turn off the product during a cleaning cycle or you may damage it.
5. Select Yes to print a nozzle check pattern.
6. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
7. Follow the instructions on the screen to clean the print head, check the nozzles, and repeat the
process as necessary.
If you don't see any improvement after cleaning the print head several times, run a Power Cleaning.
Parent topic: Print Head Cleaning
Related references
Maintenance Menu
Environmental Specifications
Related tasks
Cleaning the Print Head Using a Computer Utility
Checking the Nozzles Using the Product Control Panel
Running a Power Cleaning Using the Product Control Panel
Removing and Installing Ink Cartridges
302