Attach Monocolumn To Base; Secure Left Monocolumn Shroud To Monocolumn; Attach Right Monocolumn Shroud To Left Monocolumn Shroud - LifeFitness LIFECYCLE INTEGRITY+ Series Assembly Instructions Manual

Attach Monocolumn to Base

CAUTION: Remove any protective covering / tape from the monocolumn and console support weldment prior
to attaching to base! Failure to remove the protective covering can cause improper grounding!

Secure Left Monocolumn Shroud to Monocolumn

Attach Right Monocolumn Shroud to Left Monocolumn Shroud

Secure the clips on the right monocolumn shroud into position on the left monocolumn shroud.
NOTE: Push gasket down to shrouds.
Item
1
2
Item
1
2 M4.2 X 19 Phillips Pan Head Screw
3
Item
1 Monocolumn Shroud, Right
2 Gasket (attached to monocolumn)
Page 14 of 24
Description
Monocolumn
M8 Hex Lock Nut
34 Nm ( 25.1 ft. lbs.)
Description
Monocolumn Shroud, Left
Grommet
1.5 Nm (1.1 ft. lbs.)
Description
Qty.
1
4
Qty.
1
2
2
Qty.
1
1