Serial Port - Polycom QSX Administrator's Manual

4. Click Next and configure these settings:
Settings
Date Format
(default: MM-dd-yyyy)
Time Format
(default: 12 Hour)
Daylight Saving Time
(default: enabled)
Time Difference from GMT
(default: -06:00)
Display Time in Call
(default: Elapsed Time)
Time Server
(default: Auto)
Time Server Address

Serial Port

The QSX system provides an RS-232 serial port for configuring a static IP address. The
QSX system is configured as DCE (Data Communications Equipment).
To configure serial port settings:
1. Log on to the QSX Admin Web as described on
2. Go to Admin Settings > General Settings > Serial Ports.
3. Configure these settings, and make sure that they match the configuration of your
computer serial port.
Description
Specifies your format preference for the date display
and lets you enter your local date.
Specifies your format preference for the time display
and lets you enter your local time.
Specifies daylight savings time setting. When you
enable this option, the system clock moves ahead
one hour. When you disable this option, the system
clock moves back one hour.
Specifies the time difference between GMT
(Greenwich Mean Time) and your location.
Specifies the time display in a call:
• Elapsed Time – Displays the amount of time in the
call.
• Local Time – Displays the local time on the screen
during a call.
• Off – Time is not displayed.
Specifies connection to a time server for automatic
system time settings.
Lets you specify the IP address of the server when
Time Server is set to Manual.
Page 23.
32