Related Manuals for infobit iTrans E90U8K
Summary of Contents for infobit iTrans E90U8K
- Page 1 E90U8K 8K HDMI & USB over HDBaseT Extender VER 1.0 www.infobitav.com info@infobitav.com...
-
Page 2: Table Of Contents
Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. -
Page 3: Introduction
1. Introduction This 8K HDMI & USB over HDBaseT Extender can extend uncompressed HD/UHD video and audio signals, eARC/ARC, RS-232, bi-directional IR, 1GbE Ethernet and USB2.0 signals up to 90m/295ft via a single CAT6A/7 cable. Video resolution is up to 8K@30 4:4:4 10bit, 4K@120Hz 4:4:4 10bit, 4K60Hz 4:4:4. -
Page 4: Package Contents
3. Package Contents ① 1 x HDBaseT Extender (Transmitter) ② 1 x HDBaseT Extender (Receiver) ③ 1 x IR Blaster Cable (1.5 meters) ④ 1 x IR Wideband Receiver Cable (1.5 meters) ⑤ 2 x 3pin-3.81mm Phoenix Connectors ⑥ 4 x Mounting Ears ⑦... - Page 5 Connection Input: 1 x HDMI IN [Type A, 19-pin female] 1 x AUDIO IN [3.5mm Stereo Mini-jack] Output: 1 x HDMI OUT [Type A, 19-pin female] 1 x HDBT OUT [RJ45, 8-pin female] 1 x AUDIO OUT [3.5mm Stereo Mini-jack] Transmitter Control: 1 x IR IN [3.5mm Stereo Mini-jack] 1 x IR OUT [3.5mm Stereo Mini-jack]...
-
Page 6: Operation Controls And Functions
5. Operation Controls and Functions 5.1 Transmitter Panel USB HOST HOST DEVICE LINK eARC USB CONTROL USB DEVICE eARC AUDIO DC 24V ETHERNET IR IN IR OUT RS-232 HDBT OUT HDMI IN HDMI OUT EDID CONFIG Name Function Description USB HOST USB Host port, connected to PC. - Page 7 Name Function Description Press the eARC button to enable/disable the eARC/ARC function, and the eARC LED will indicate the status as following. ▪ Light on: The eARC/ARC mode is enabled, and the device is eARC LED working normally. & button ▪...
- Page 8 Name Function Description This port features two functions: eARC/HDMI (1) HDMI signal input port, connected to HDMI source device; IN port (2) eARC/ARC audio port, connected to eARC/ARC amplifier. HDMI video signal output port. It can loop out the local video HDMI OUT signal or output the video signal returned from the receiver.
-
Page 9: Receiver Panel
5.2 Receiver Panel USB HOST HOST DEVICE LINK eARC USB CONTROL USB DEVICE eARC AUDIO DC 24V ETHERNET IR IN IR OUT RS-232 HDBT IN HDMI IN HDMI OUT CONFIG Name Function Description USB HOST USB Host port, connected to PC. Two USB extension ports, connected to U disk, mouse or keyboard. - Page 10 Name Function Description Press the eARC button to enable/disable the eARC/ARC function, and the eARC LED will indicate the status as following. ▪ Light on: The eARC/ARC mode is enabled, and the device is eARC LED working normally. & button ▪...
- Page 11 Name Function Description HDMI signal input port, connected to HDMI source device. It can transmit video with resolution of 1080P 24Hz in reverse to the HDMI OUT port of the transmitter. HDMI IN port Note: It is a reserved port, being closed by default. Before using this port, you need to turn on it through command control, and make sure that the eARC function is disabled.
-
Page 12: Usb Mode Applications
5.3 USB Mode Applications The Extender supports USB2.0 transmission, and Host/Device is configurable. Mode 1: USB forward from TX to RX Switch the HOST/DEVICE USB CONTROL switch to left, then power off and reboot the transmitter to set to USB Host mode. Meanwhile, switch the DEVICE/HOST USB switch to left, then power off and reboot the receiver to set to USB Device mode. -
Page 13: Ir Pin Definition
5.4 IR Pin Definition IR Receiver and Blaster pin’s definition as below: IR RECEIVER IR BLASTER IR BLASTER IR RECEIVER Power 12V Note: When the angle between the IR receiver and the remote control is ± 45 °, the transmission distance is 0-5 meters; when the angle between the IR receiver and the remote control is ±... -
Page 14: Application Example
6. Application Example Mode 1: eARC/ARC Application The Audio Return Channel (ARC) in HDMI 2.1 enables a TV, via a single HDMI cable or audio cable, to send audio data “upstream” to an A/V receiver, the extender will continue the upstream audio all the way to the transmitter. There it can be connected via HDMI ARC. - Page 15 Mode 2: Ordinary Connection Application Desktop Computer Network Cable Switch Audio Audio Network Cable HDMI Cable USB Cable Cable Cable Transmitter HDMI Cable HDBaseT Cable Receiver Audio HDMI Cable USB Cable Network Cable Cable Cable Mouse Speakers USB Camera Keyboard Router Note: Please press the eARC buttons on the front panel of the transmitter and receiver to disable the eARC/ARC function before operating the system.