Advertisement
Quick Links
Advertisement
Related Manuals for infobit iTrans B70S
Summary of Contents for infobit iTrans B70S
- Page 1 B70S www.infobitav.com info@infobitav.com...
- Page 3 The extender must use direct interconnection method CAT cable. The extender will go into protection mode automatically and no video out when using cross interconnection method CAT cable.
- Page 4 The 18Gbps HDMI Extender is a tool which can extend your HDMI signal over 230fts/70meters to a compatible display. It is designed to convert HDMI signal to standard HDBaseT signal which can be transmitted by LAN cable. It also supports Transfer Bidirectional Infrared control signal together with the HDMI signal, so you can control the Source in the Sink side which is 230fts outside, also you can control the Sink in the Source side which is 230fts outside by using the HDMI Extender.
- Page 5 Transmission distance: ※Over CAT6 cable 70 meters: 1080P @60Hz36bit; 3D1080P@30Hz36bit; 40 meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit; 3D1080P@60Hz@36bit; 4K x 2K@30Hz@24bit. 4K2K@50/60Hz (YUV420), 4K2K@50/60Hz (YUV444) 1 x HDMI 18Gbps Transmitter 1 x HDMI 18Gbps Receiver 2 x Wideband IR Tx 2 x Wideband IR Rx 1 x 24V/1A Power Adaptor 1 x User Manual 4/11...
- Page 6 5/11...
- Page 7 Power LED: System power indicator. DC 24V: Connect 24V/1A adaptor to AC wall outlet for power supply. HD BaseT Out: Standard HD BaseT signal output port. Connect HDBaseT receiver with a UTP cable following the standard of direct interconnection method HDMI In: Connect this to HDMI source devices such as Blu-ray or PS4 player...
- Page 8 Connection Signal Indicator Lamp ※Illuminate: The Transmitter and Receiver are in good connections status. ※Flashing: The Transmitter and Receiver are in poor connections status. ※Dark: The Transmitter and Receiver are not connected. Data Signal Indicator Lamp ※Illuminate: The HDMI signal with HDCP. ※Flashing: The HDMI signal without HDCP.
- Page 9 HDBaseT In: Standard HD BaseT signal input port. Connect HDBaseT Transmitter with a UTP cable following the standard of direct interconnection method. HDMI Out: HDMI output port. This slot is where you connect the HDTV or monitor with HDMI cable. IR In: Channel 1 IR Receiver.
- Page 10 ※ Description 1 POC (Power Over Cable) Application Example ※ Description 2 Bidirectional Infrared control Application Example 9/11...
- Page 11 ※ Description 3 Bidirectional RS-232 control Application Example 10/11...
- Page 12 11/11...
Need help?
Do you have a question about the iTrans B70S and is the answer not in the manual?
Questions and answers