Related Manuals for infobit iTrans E150SK
Summary of Contents for infobit iTrans E150SK
- Page 1 18Gbps HDBaseT Extender (150m) with KVM Function Model: iTrans E150SK VER 1.0 www.infobitav.com info@infobitav.com...
-
Page 2: Table Of Contents
Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. -
Page 3: Introduction
1. Introduction This 18Gbps HDBaseT Extender can extend HDMI signal, bi-directional IR control signal and USB KVM signal to a distance up to 150m via a single CAT6 cable. This product converts HDMI signal to standard HDBaseT signal and transmits it through LAN cable. It can easily control signal source device or display device from the remote end through bi-directional IR signal pass- through function. -
Page 4: Package Contents
3. Package Contents ① 1 x 18Gbps HDBaseT Extender (Transmitter) ② 1 x 18Gbps HDBaseT Extender (Receiver) ③ 1 x IR Blaster cable (1.5 meters) ④ 1 x IR Receiver cable (1.5 meters) ⑤ 1 x USB cable (1.5 meters) ⑥... - Page 5 Connection Input: 1×HDMI IN [TypeA, 19-pin female] 1×IR IN [3.5mm Stereo Mini-jack] 1×SERVICE [Micro-USB jack] Transmitter 1×USB [USB-B, 4-pin female] Output: 1×HDBT OUT [RJ45] 1×IR OUT [3.5mm Stereo Mini-jack] Input: 1×HDBT IN [RJ45 with light] 1×IR IN [3.5mm Stereo Mini-jack] 1×SERVICE [Micro-USB jack] Receiver Output: 1×HDMI OUT [TypeA, 19-pin female]...
-
Page 6: Operation Controls And Functions
5. Operation Controls and Functions 5.1 Transmitter Panel COPY SERVICE EDID HDMI IN IR IN IR OUT DC 24V Name Function Description PWR LED The red LED is on when the Transmitter is powered on. Used for EDID setting (dial to COPY by default). EDID DIP COPY: Copy the EDID of the HDMI OUT port of Receiver. -
Page 7: Receiver Panel
Name Function Description Connect to IR receiver cable, the IR receive signal will emit IR IN to the IR OUT port of the Receiver. Connect to IR blaster cable, the IR emit signal is from the IR IR OUT IN port of the Receiver. USB-B port, connecting to PC. -
Page 8: Ir Pin Definition
Name Function Description ▪ Illuminate: HDMI signal with HDCP. Data Signal ▪ Flash: HDMI signal without HDCP. Indicator ▪ Dark: No HDMI signal. (Yellow) HDMI signal output port, connecting to HDMI display device HDMI OUT such as TV or monitor. Connect to the IR receiver cable. -
Page 9: Application Example
6. Application Example COPY SERVICE EDID Transmitter HDMI IN IR IN IR OUT DC 24V IR Blaster Power Supply IR Receiver DVD or Blu-ray Player IR Blaster CAT6 Cable UHDTV IR Receiver Keyboard Mouse DC 24V HDMI OUT IR IN IR OUT Receiver SERVICE...