Related Manuals for infobit iTrans F1000
Summary of Contents for infobit iTrans F1000
- Page 1 F1000 18Gbps HDMI over Optical Fiber Extender with Audio Extracting VER 2.0 www.infobitav.com...
-
Page 2: Table Of Contents
Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. -
Page 3: Introduction
1. Introduction This HDMI Extender can extend HDMI signal up to 33000 feet/10 km (over single-mode fiber cable) . It supports video resolution up to 4K2K@60Hz 4:4:4. Transmitter supports loop output, audio embedding and EDID management function. Receiver supports audio extracting function. In addition, the extender supports bidirectional IR control and RS-232 signal pass-through. -
Page 4: Package Contents
3. Package Contents ① 1× 18Gbps HDMI over Optical Fiber Extender (Transmitter) ② 1× 18Gbps HDMI over Optical Fiber Extender (Receiver) ③ 1× IR Blaster cable (1.5 meters) ④ 1× IR Receiver cable (1.5 meters) ⑤ 2× 5V/1A Power adapter ⑥... -
Page 5: Operation Controls And Functions
Input: 1 x Optical Fiber In [LC female] 1 x IR IN [3.5mm Stereo Mini-jack] 1 x SERVICE [Micro USB, Update port] Receiver Output: 1 x HDMI OUT [Type A 19-pin female] 1 x RS-232 [3.81mm Phoenix connector] 1 x IR OUT [3.5mm Stereo Mini-jack] 1 x AUDIO OUT [3.5mm Stereo Mini-jack] Mechanical Housing... - Page 6 Name Function Description The power indicator is always on when the Transmitter is Power LED powered on. The optical fiber connection indicator is always on when the FIBER LED Transmitter and Receiver establish a normal optical fiber signal connection. IN: The HDMI signal input indicator is always on when there is signal input on the HDMI IN port.
-
Page 7: Receiver Panel
5.2 Receiver Panel SERVICE POWER FIBER HDMI IR IN IR OUT DC 5V HDMI OUT AUDIO OUT RS-232 FIBER Name Function Description The power indicator is always on when the Receiver is Power LED powered on. The optical fiber connection indicator is always on when the FIBER LED Transmitter and Receiver establish a normal optical fiber signal connection. -
Page 8: Ir Pin Definition
5.3 IR Pin Definition IR Receiver and Blaster pin’s definition as below: IR RECEIVER IR BLASTER IR Blaster IR Blaster Signal Power IR Receiver IR Signal Power Grounding 5.3 Optical Fiber Module ① SFP-BL32TG-10DC is the optical fiber module of the Transmitter. ②... -
Page 9: Application Example
6. Application Example IR Receiver IR Blaster HDMI SERVICE LINE POWER FIBER LOOP AUDIO EDID HDMI IR IN IR OUT Transmitter OPTICAL DC 5V HDMI OUT HDMI IN LINE IN RS-232 FIBER Power Supply DVD or Blu-ray Player UHDTV Laptop Optical fiber cable Speaker Projector...