Advertisement
Quick Links
Advertisement
Related Manuals for infobit E70C
Summary of Contents for infobit E70C
- Page 1 HDBaseT Extender kit 70m with RS232 Model: E70C VER 1.0...
-
Page 2: Table Of Contents
Thank you for purchasing this product For optimum performance and safety, please read these instructions carefu- lly before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shook, lighting strikes, etc. -
Page 3: Introduction
1. Introduction Thank you for purchasing this HDBaseT Extender kit 70m with PoC/RS232/ HDCP2.2. This is a HDBaseT Extender set consist of of transmitter and receiver. It distributes HDMI signal via CAT5e/CAT6 cable at 70m/PoC, and enables IR and RS232 pass-through to control local source device from remote or far-end display. -
Page 4: Specifications
4. Specifications Technical HDMI Compliance HDMI 1.4 HDCP Compliance HDCP 2.2 Bandwidth 10.2Gbps Video Resolutions Up to 4K×2K@60Hz 4:2:0 Transmission Mode HDBaseT Transmission Distance 1080P≤70m; 4K×2K≤40m Human-body Model: ESD Protection ±8kV (Air-gap discharge) , ±4kV (Contact discharge) Connections Input: 1×HDMI Type A [19-pin female] Output: 1×HDBT Out [RJ45] Transmitter ports Control: 1×IR In [3.5mm Stereo Mini-jack]... -
Page 5: Operation Controls And Functions
5. Operation Controls and Functions 5.1 Transmitter Panel Number Name Function description HDMI In Connect with HDMI source. Work with far-end IR Out port, connect with 12V IR IR In Receiver to collect IR signal to control far-end display device from local. Work with far-end IR In port, connect with 12V IR IR Out Emitter to send IR signal to control input source device... -
Page 6: Receiver Panel
5.2 Receiver Panel Number Name Function description HDMI Out Connect with HDMI display. Work with far-end IR Out port, connect with 12V IR IR In Receiver to collect IR signal to control far-end display device from local. Work with far-end IR In port, connect with 12V IR IR Out Emitter to send IR signal to control input source device from remmote. -
Page 7: Application Example
6. Application Example Transmitter Power Supply IR Receiver IR Emitter CAT5e/6 cable HDMI Matrix DVD or Blu-ray player Receiver IR Receiver Laptop IR Emitter...