Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc.
1. Introduction This product is based on H.265 standard solution for transmitting one HD source signal to one HD display. It extends distance up to 330ft/100 meters (In an open environment without Wi-Fi interference) between the encoder and decoder via wireless transmission. It supports one-way IR control. It offers high quality configurable and low-bandwidth H.265 compression video.
4. Specifications Technical HDMI Compliance HDMI 1.3 HDCP Compliance HDCP 1.4 Video Bandwidth 4.95Gbps Input: Up to 1920×1080@60Hz Video Resolution Output: Up to 1080P@60Hz Color Space RGB, YCbCr 4:4:4 / 4:2:2 Color Depth 8/10/12-bit (1080P@60Hz) Input: LPCM 2.0CH 32KHz/44.1KHz/48KHz/ HDMI Audio Formats 88.2KHz/96KHz/176.4KHz/192KHz Output: LPCM 2.0CH 48KHz Human body model —...
Storage Temperature -4 - 140°F / -20 - 60°C Relative Humidity 20 - 90% RH (no condensation) Resolution / 1080P60Hz - Cable Length Feet / Meters HDMI IN / OUT 42ft / 15M The use of “Premium High Speed HDMI” cable is highly recommended. 5.
5.2 Decoder Panel LINK HDMI OUT DC 5V PAIR SERVICE IR IN Name Function Description Power LED The LED will illuminate red when the decoder is powered on. The LINK LED flashing means that the encoder and decoder LINK LED are transmitting video signals.
The specific instructions are shown in the following table. Decoder’s LINK Encoder’s LINK Description LED status (Green) LED status (Green) The encoder and decoder are not paired Always on Always on or connected. Flash Always on Successful pairing. The encoder and decoder are paired Flash Flash successfully, and there is video signal...
Page 8
Connection diagram of using IR cables. Encoder Decoder Note that when the angle between the IR receiver and the remote control is ± 45 °, the transmission distance is 0-5 meters; when the DVD remote angle between the IR receiver and the remote control is ± 90 °, the transmission distance is 0-8 meters.
6. Application Example 100m. The transmission distance extends up to Encoder Decoder Power Supply Power Supply DVD or Blu-ray Player The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.