Prestart Inspection Checklist - Snorkel TB66JRT Operator's Manual

Prestart Inspection Checklist

Item
Operator's Manual
Engine
Oil Level
Coolant
Radiator
Fuel tank and line
Air filter
Charging system
Cold weather start kit
Electrical System
Battery
Battery fluid level and terminals
Cables and wiring harness
Hydraulic System
Fluid level
Fluid filter
Hoses, tubes and fittings
Cold weather warm-up kit
Tires and wheels
Lower Control Station
Operating controls
Emergency stop and emergency power
Emergency Lowering
Level Sensor
Flashing Lights
Structures
Weldments – Chassis, turntable, booms, platform, etc.
Slide pads
Fasteners
Wire ropes
Upper Control Station
Guardrail system and lanyard anchors
Operating controls – Boom functions, drive, brakes, etc.
Emergency stop and emergency power
Horn
Electrical power outlet – GFCI
Driving and work lights
Platform control cover
All Motion Alarm
Sandblast Protection Kit
Air Line to Platform
Driving and Platform Work Lights
Tow Kit
Platform Glazier Package
Bump Guard System
Placards and Decals
TB66J – 0083740
Chapter 7 – Prestart Inspection
Inspect For
In place, all pages readable and intact
Between full and add marks
Liquid cooled engines – proper fluid level
Air cooled engines – air intake and fan free of
obstructions, belt in good condition
Cap tight, good condition and clean
Tank full, cap in place and tight/no leaks
Clear indicator
Proper operation
No damage or deformation
Condition and charged for proper operation
Proper level/clean, connectors tight
No wear or physical damage
Between add and full marks, cap in place and tight
Verify operation in the green zone
No leaks
Proper operation
Good condition
Proper operation
Shuts off lower controls/proper operation
Proper operation
Sounds tilt alarm
Proper operation
Welds intact, no damage or deformation
In place, no damage or deformation
In place, tight, and no damage
No deformation or broken strands
Welds intact, no damage or deformation
Proper operation
Shuts off upper controls/proper operation
Sounds when activated
Proper operation
Proper operation
In place and proper operation
Sounds when machine is operated and/or driven
In place and proper operation
No damage or deformation, caps in place
No damage or deformation, proper operation
In place, no damage or deformation
Good condition
Good condition, proper operation
In place and readable
OK
47