Stihl RME 235.0 Instruction Manual page 36

English
Fault
The lawn mower
stops during opera‐
tion.
The lawn mower vib‐
rates excessively
during operation.
The grass has not
been cut cleanly or
the lawn is yellow.
36
Cause
The circuit breaker (fuse) or the resi‐
dual current device tripped. The circuit
is electrically overloaded or defective.
The fuse protection of the socket is too
low.
The cross section of the extension
cable is incorrect.
The extension cable is too long.
The engine is overheated.
The resistance at the blade is too
great.
The area around the blade is blocked. ► Clean the lawn mower,
GB country-specific version: The fuse
in the plug is faulty.
The plug or extension cable connector
are no longer plugged in.
The circuit breaker (fuse) or the resi‐
dual current device tripped. The circuit
is electrically overloaded or defective.
The fuse protection of the socket is too
low.
The overload protection has triggered. ► Allow the lawn mower to cool down.
The blade is blocked.
The blade fastening screw is loose.
The blade is not correctly balanced.
The blade is blunt or worn.
The resistance at the blade is too
great.
17 Troubleshooting
Remedy
► Find and fix the cause of the circuit
breaker or RCD tripping. Insert the
circuit breaker (fuse) or residual cur‐
rent device.
► Switch other power consumers in
the same circuit off.
► Insert the plug of the extension
cable into a correctly fused socket,
18.
► Use an extension cable with an ade‐
quate cable cross section,
► Use an extension cable with the cor‐
rect length, 18.
► Clean the lawn mower,
► Allow the lawn mower to cool down.
► Set a higher cutting height,
► Switch the lawn mower on in lower
grass.
► Replace the fuse in the plug.
► Insert the plug or extension cable
connector, 7.
► Find and fix the cause of the circuit
breaker or RCD tripping. Insert the
circuit breaker (fuse) or residual cur‐
rent device.
► Switch other power consumers in
the same circuit off.
► Insert the plug of the extension
cable into a correctly fused socket,
18.
Cooling time up to 10 minutes.
► Clean the lawn mower,
► Guide the lawn mower more slowly.
► Set a higher cutting height,
► Mow shorter grass.
► Sharpen the blade,
► Use an extension cable with the cor‐
rect length, 18.
► Use an extension cable with an ade‐
quate cable cross section,
► Clean the lawn mower,
► Tighten the screw,
► Sharpen and balance the blade,
15.3.
► Sharpen and balance the blade,
15.3.
► Set a higher cutting height,
► Mow shorter grass.
18.
14.
10.2.
14.
14.
10.2.
15.3.
18.
14.
15.2.2.
10.2.
0478-121-9805-A