Danfoss DEVIreg Smart Installation Manual page 21

Intelligent electronic timer thermostat or switch with wi-fi connectivity and app control

Hide thumbs Also See for DEVIreg Smart:

Table of Contents

DEVIreg™ Smart

up to 45°. Furthermore, it will be possible to use only a

room sensor. However, this option is not recommended

due to an increased risk of overheating the floor.

IMPORTANT: When the thermostat is used to control a

floor heating element in connection with a wooden floor

or similar material, always use a floor sensor and never set

the maximum floor temperature to more than 35°C.

Note: Please contact the floor supplier before changing

the maximum floor temperature and be aware of the

following:

• The floor temperature is measured there, where the

sensor is placed.

• The temperature of the bottom of a wooden floor

can be up to 10˚C higher than the top.

• Floor manufactures often specify the max. tempera-

ture on the top surface of the floor.

Installation Guide

Table of Contents

Need help?

Do you have a question about the DEVIreg Smart and is the answer not in the manual?