Configuring - Danfoss DEVIreg Smart Installation Manual

Intelligent electronic timer thermostat or switch with wi-fi connectivity and app control

Hide thumbs Also See for DEVIreg Smart:

Table of Contents

DEVIreg™ Smart

Configuring

Download App

Download the DEVIsmart™ app from App Store

or Google Play or at devismart.com.

Find WiFi name and password for the WiFi

network, that you would like to connect your

thermostat/switch to. If in doubt contact net-

work administrator or internet service provider.

Identify your floor sensor type ( in kOhm).

Identify your installed output (in W), from

label on the heating element/equipment.

Power on the thermostat, and it will show "-"

in the display. Then it is ready to be configured

using your iPhone and Android device.

Open the DEVIsmart™ App. Follow instructions and set-

up flow in the App.

DEVIreg™ Smart indication

The DEVIreg™ Smart shows "–" indicating that power is

ON, but still need to be configured.

Installation Guide

Table of Contents

Do you have a question about the DEVIreg Smart and is the answer not in the manual?