Starting Cold Engine - Shindaiwa C302 Operator's Manual

OPERATION

Starting Cold Engine

The attachment will operate immediately when the engine
starts, and could result in possible serious injury. Keep
movable parts of the attachment away from objects that could
become entangled or thrown, and surfaces that could cause
loss of control.
1. Stop Switch
Move stop switch button (A)
backward, away from the STOP
position.
2. Choke
Move choke lever (B) to COLD
START (
3. Purge Bulb
Pump purge bulb (C) until fuel is
visible and flows freely in the
clear fuel tank return line. Pump
bulb an additional four or five
times.
Note: Lightly place knee on
drive shaft to stabilize unit
during starting. Do not
apply excessive
downward force or
damage to unit can occur.
32
) position.
A
C
B
© 05/22 ECHO Incorporated
C302
X7502350403