Table of Contents
Advertisement
MAINTENANCE
Exhaust System
Spark Arrester Screen
Level 2.
Parts required: Spark Arrester Screen, Gasket.
1.
Remove spark plug lead.
2.
Remove muffler cover (A).
3.
Place piston at Top Dead
Center (TDC) to prevent carbon
or dirt from entering cylinder.
4.
Remove spark arrestor screen
cover (B), gasket (C), and
screen (D), from muffler body.
5.
Clean carbon deposits from
muffler components.
Note: When cleaning carbon
deposit, be careful not to
damage the catalytic
element inside muffler.
6.
Replace screen if it is cracked, plugged, or has holes burned through.
7.
Assemble components in reverse order.
46
B
D
C
© 05/22 ECHO Incorporated
C302
A
X7502350403
Advertisement
Table of Contents
