Table of Contents
Advertisement
Technical Data
Power Requirements
. . . . . . . . . . . . . . . . . . . .
Generator
. . . . . . . . . . . . . . . . . . . . . . . . . .
Working Pressure Range
. . . . . . . . .
Motor
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cycles/Gallon (liter)
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Delivery
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tip Size
. . . . . . . . . . . . . . . . . . . . . . . .
Power Cord
. . . . . . . . . . . . . . .
Inlet Paint Strainer
. . . . . . . . . . . . . . . .
Pump Inlet Size
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fluid Outlet Size
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wetted Parts:
Displacement Pump
. . . . . . .
PTFE,
Aluminum, Polyethylene, Delrin , Leather
NOTE: D
Dimensions
Weight (dry w/o packaging)
Height
Length
Width
The Graco Warranty and Disclaimers
WARRANTY
Graco warrants all equipment manufactured by it and bearing its name to be free from defects in material and workmanship on the date of sale by
an authorized Graco distributor to the original purchaser for use. As purchaser's sole remedy for breach of this warranty, Graco will, for a period of
twelve months from the date of sale, repair or replace any part of the equipment proven defective, with the exception of defects in parts on the drive
train/gear box on EM and GM sprayers or power train on EH and GH sprayers, which will be repaired or replaced for twenty-four months from the
date of sale for Gas–Hydraulic (GH) and Gas-Mechanical (GM) sprayers and for thirty-six months from the date of sale for Electric-Mechanical
(EM), Electric-Hydraulic (EH), 390st and 490st sprayers. This warranty applies only when the equipment is installed, operated and maintained in
accordance with Graco's written recommendations.
This warranty does not cover, and Graco shall not be liable for, any malfunction, damage or wear caused by faulty installation, misapplication, abra-
sion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non–Graco component parts. Nor shall
Graco be liable for malfunction, damage or wear caused by the incompatibility with Graco equipment of structures, accessories, equipment or mate-
rials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or
materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of
the claim. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the origi-
nal purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at
a reasonable charge, which charges may include the costs of parts, labor and transportation.
DISCLAIMERS AND LIMITATIONS
The terms of this warranty constitute purchaser's sole and exclusive remedy and are in lieu of any other warranties (express or implied), including
warranty of merchantability or warranty of fitness for a particular purpose, and of any non–contractual liabilities, including product liabilities, based on
negligence or strict liability. Every form of liability for direct, special or consequential damages or loss is expressly excluded and denied. In no case
shall Graco's liability exceed the amount of the purchase price. Any action for breach of warranty must be brought within two (2) years of the date of
sale.
EQUIPMENT NOT COVERED BY GRACO WARRANTY
Graco makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose, with respect
to accessories, equipment, materials, or components sold but not manufactured by Graco. These items sold, but not manufac-
tured by Graco (such as electric motor, switches, hose, etc.) are subject to the warranty, if any, of their manufacturer. Graco will
provide purchaser with reasonable assistance in making any claim for breach of these warranties.
Foreign Offices: Belgium; Canada; England; Korea; Switzerland; France; Germany; Hong Kong; Japan
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
120 VAC,60Hz,
1 phase, 15 amp minimum
3000 Watt minimum
0–2750 psi (0 – 195 bar)
5/8 hp
620 (164)
0.44 gpm (1.66 lpm)
one gun to 0.021 new tip
with latex at 2000 psi (138 bar)
No. 14 AWG, 3 wire, 6' (1.8 m)
12 mesh (1525 micron)
Stainless Steel Screen, reusable
1/2 npt(f)
1/4 npsm
Stainless steel, Carbon steel,
37 lb (17 kg)
19 in. (483 mm)
15 in. (381 mm)
14 in. (356 mm)
Sales Offices: Atlanta, Chicago, Detroit, Los Angeles
PRINTED IN U.S.A.
DANGER LABELS
The English language DANGER label shown on
page 1 is also on your sprayer. If you have paint-
ers who do not read English, order one of the
following labels to apply to your sprayer. The
drawing below shows the best placement of these
labels for good visibility.
Order the labels directly from Graco, free of
charge: 1–800–328–0211
French
185–956
Spanish
185–961
German
186–041
Greek
186–045
Korean
186–049
English
185–953
December 1995
Apply other
language here
04653
Advertisement
Table of Contents
