About Cable Select - Plextor PX-W4824TA Installation And User Manual

Before PlexWriter Installation
D System uses special Cable Select
cables; all devices are jumpered for
Cable Select.
Figure 9: How to Install the PlexWriter If Your Computer Is Originally Set Up in

About Cable Select

The Cable Select jumper position sets the PlexWriter drive to use the CSEL signal
from the IDE interface for configuration purposes. This signal automatically selects
the correct Master/Slave setting for the PlexWriter.
Figure 10: Using the CSEL Jumper to Configure the PlexWriter Drive
Section 2. Installing Your PlexWriter
How to Install the PlexWriter
Set the PlexWriter's mode jumper to
CSEL, and connect it to the end of
the cable from the computer's IDE
interface connector.
Configuration D
PlexWriter 48/24/48A Installation and Users Manual
13