System - D-Link E30 User Manual

Section 3 - Configuration
This page allows you to save or restore your system configurations as well as reset or reboot the extender. To access this page, go to
Management > System.
Save Settings To Local Save the system settings in a file to the local hard drive. The
Hard Drive configuration file will be saved in your browser's download
directory.
Load Settings From Select the system settings from a previously saved file on the
Local Hard Drive local hard drive. Click the Restore button that appears after
the configuration file is selected to load the settings.
Restore to Factory
Restore the system settings to factory default settings. This
Default Settings
will erase all current settings.
Click Reboot to reboot the extender.
Reboot the Device
D-Link E30 User Manual

System

36