Admin - D-Link E30 User Manual

Section 3 - Configuration
This page allows you to set a new password for the administrator account used to configure E30. To access this page, go to
Management > Admin. Click Save at any time to save the changes you made on this page.
Password
Enter a new password for the administrator account. You
will need to enter this password whenever you configure
the extender using a web browser or add the extender to
AQUILA PRO AI. It is recommended that you change the
default device password printed on the device label on the
side of the device.
Advanced Settings... - Administration
Enable HTTPS
Enable web management using an encrypted HT TP
Management
connection.
Status LED
Turn the LED status lights on or off.
D-Link E30 User Manual
Admin Password
LED Control

Admin

35