Table of Contents
Advertisement
Section 3 - Configuration
IPv6 -
Auto configuration (SLAAC/DHCPv6)
My Internet Connection
Select Auto configuration (SLAAC/DHCPv6) to have E30
is
automatically receive an IPv6 address from the uplink router.
Obtain a DNS server
You can obtain IPv6 DNS server information automatically,
or configure DNS servers manually by selecting Use the
address automatically
following DNS address.
Primary DNS
For manual settings, enter the primary IPv6 DNS server address.
Secondary DNS
For manual settings, enter the secondary IPv6 DNS server
address. This is optional but will provide backup if the primary
server fails.
My Internet Connection
Select Static IPv6 to manually assign an IP address to E30.
is
IPv6 Address
Enter the IPv6 address that you want to assign to the extender.
This address should be outside of the uplink router's DHCP
address pool.
Subnet Prefix Length
Enter the length of the IPv6 subnet prefix for identifying the
IPv6 subnetwork (valid range: 1~128).
Default Gateway
Enter the default gateway.
Primary DNS
Enter the primary IPv6 DNS server address.
Secondary DNS
Enter the secondary IPv6 DNS server address. This is optional
but will provide backup if the primary server fails.
IPv6 -
My Internet Connection
Select Local Connectivity Only to set an IPv6 address only
is
for the local network.
LAN IPv6 Link-Local
The link-local address of the E30 is used only within the local
Address
network specific to a physical interface.
D-Link E30 User Manual
IPv6 -
Static IPv6
Local Connectivity Only
32
Advertisement
Table of Contents
