Schiller AT-10 plus User Manual page 41

AT-10 plus
Parameter Options
Rhythm Rec (not
Rhythm Lead R1, R2, R3
available at time of
and r1
print)
Format
Amplitude
Print current page
Print last page
Start / Stop
Signal Average High Pass Filter
(Late Potentials)
(Not available at
time of print)
No. of QRS
RR Variability (Not Window Type
available at time of
print)
No of RR
FFt Type
Phase - space plots
Correction of RR
Lower bound of VLF
Lower bound of LF
Lower bound of HF
Upper bound of HF
Signal Acquisition Start /
Stop
User Guide
Description
Defines the rhythm leads used for rhythm recording
Defines the printout format (and by default the speed of the trace). Select
between:
• 90 sec/page - printout every 90 seconds
• 5 min./page - printout every 5 minutes
• 10 min./page - printout every 10 minutes
Defines the amplitude of the trace. Select between:
• Normal
• Low (half amplitude)
For Rhythm recording
For the recording procedure
Starts / Stops Rhythm recording. For the recording procedure
Select between 25Hz, 40Hz and 80Hz - late potential analysis RR is a future
option and not available for this release
RR variability is a future option and not available for this release
see page 36.
see page 36.
Resting ECG 5
ECG Settings 5.7
see page 36.
Page 41