Troubleshooting; Make Sure The Drive Is Recognized - Plextor PX-760 Installation And User Manual

Section 5. Maintenance and Troubleshooting
11. Install the new tray face plate by pressing the L-shaped forms on
both sides of the face plate into the rib of the disc tray, and sliding
the face plate downward until the two hooks are fixed.
Close the disc tray gently, and reinstall the drive in the computer.
To install the drive in your computer, go to Section 2 on page 11 (for the
PX-760A drive) or Section 3 on page 37 (for the PX-760SA drive).

Troubleshooting

If you have problems during or right after installation of your drive, first
make sure the drive is recognized. If you still have problems, visit the
Plextor web site for tips and troubleshooting help.

Make Sure the Drive Is Recognized

If you're having trouble after installation, make sure the PX-760 drive is
recognized by your computer. To check whether the drive is recognized:
To see if the drive is recognized in Windows:
1. Turn the computer ON. After the computer boots up, you should see
the Windows display.
2. Open Windows Explorer or My Computer and ensure there is an
icon for the Plextor drive, the hard disk, and another DVD or CD-
ROM drive, if present. The Plextor icon may be D: or E: or another
designator.
62
PX-760 Installation and Users Manual
Figure 37: Install the tray face plate