Plextor PX-760 Installation And User Manual page 36

Section 2. Installing the PX-760A Internal ATAPI Drive
Before PX-760A
Installation
D System uses special Cable
Select cables; all devices are
jumpered for Cable Select.
Figure 11: How to install the PX-760A if your computer is originally
28
PX-760 Installation and Users Manual
set up in configuration D
How to Install the
PX-760A
Set the PX-760A's mode
jumper to CSEL, and connect
the drive to the end of the cable
from the computer's IDE
interface connector.