Table of Contents
Advertisement
T
M
AKING A
ULTIPLE
If you are satisfied with the measurement, and
wish to add it to your total, press Forward. The
instrument adds the current measurement to
the total and displays the new total.
7. When the total is showing, you have another
two options.
To simply take the next measurement without
downloading, return to step 5.
To download the current total, press Forward.
The arrows begin flashing again, and you may
then return to step 5 for the next measurement.
In most cumulative distance measurement
exercises, you will want to take a series of
measurements, and download only once, when
a series of related measurements are complete.
Page 38
M
EASUREMENT
Electronic Copy of LTI's Impulse User's Manual 8
Additional Notes:
The cumulative measurement total is saved in
memory even if the instrument is powered off. If
you turn the instrument on and scroll back to the
MULTI - CUM option, you can resume the
procedure with step 7.
To clear out the current total and begin another
series of measurements, long-press the Back
button while the cumulative distance total is
showing.
In the Impulse 200, the instrument keeps the total
in both SD and HD, and you can switch between
the two at any time. If you are viewing a single
distance measurement on the display, press Back
once and repeat step 4 to toggle between SD and
HD. If you are viewing a cumulative total, press
Back twice and repeat step 4.
th
Edition © October 1998
Advertisement
Table of Contents
