Instrument Options And Indicators - Laser Technology IMPULSE LR User Manual

I O
NSTRUMENT PTIONS AND
The internal software of the Impulse is organized into options. Each option represents a specific Impulse
measurement or setup function and has a corresponding indicator on the LCD screen. To view all of the
possible Impulse indicators at once, power up the instrument by pressing the Fire or Fire2 button, and keep
the button pressed down. This is also a good way for you to check if all the components on your display are
working properly. The display will look like this:
The display indicators are grouped by function, and fall into four categories: measurement modes,
measurement modifiers, indicators/warnings, and settings/options. Note: Your instrument may not have all the
features described.
Page 8
I
NDICATORS
RIGHT HT GATE HD
LEFT SD G S L VD
LASER OFFSET BORE
BATT PIVOT UNITS
Electronic Copy of LTI's Impulse User's Manual 8
MULTI SYS INC
CUM DIFF
F M
D G
% V
FILTER CAL DNLD
UPDATE MEM AUTO
th Edition © October 1998