Laser Technology IMPULSE LR User Manual page 27

S L
ETTING UP FOR EFT
Reconfiguring the Button Panels
The Impulse has a three-button control panel on
each side of the instrument. One of those panels is
designated the primary panel; the other, the
secondary panel. The primary panel (denoted by
"RIGHT" or LEFT" in the upper left corner of the
display) controls the primary functions of the
instrument. The secondary panel controls ancillary
functions and generally gets much less use. For
easy handling, you will usually want the primary
panel to be the one on the same side as the hand
strap.
Follow this procedure to switch the primary panel:
1. Press the Fire button to power on the
instrument.
Page 19
- O
HANDED PERATION
Electronic Copy of LTI's Impulse User's Manual 8
2. Repeatedly press Forward or Back until the
indicator SYS shows in the upper right quadrant
of the back panel display screen.
3. Press Fire to enter the SYS submenu.
4. Repeatedly press Forward until SEL shows in
the middle of the display screen, and the panel
indicator begins flashing in the upper left
quadrant. (This is the last item in the SYS
submenu.)
5. Press Fire to toggle the primary panel between
RIGHT and LEFT.
6. With the desired panel indicator showing, press
Forward to accept the change. At this point, the
button panels have been switched and you will
need to press Back on the new primary panel to
back out to the main menu.
th Edition © October 1998