Installing And Removing A Board; Installing A Board - Fujitsu CELSIUS W550 Operating Manual

Installing and removing a board

You can install additional modules in order to increase the performance of your machine.
The number, position and arrangement of the board slots on the mainboard can be found in
the manual for the mainboard. Boards may already be installed on shipment.
The following chapter illustrates the standard version and not the power version. However,
the procedure in the following chapters is the same for both versions.
Board, Board,

Installing a board

If possible, always install display adapters in the second slot from the right.
► Open the casing (see
Board
► Push the retaining clip (1) towards the slot cover to unlock it, then move
it towards the back panel of the device.
► Pull the slot cover out of the slot in the direction of the arrow (2).
Fujitsu
"Opening the casing", Page
1
2 2
34).
System expansions
49