Fujitsu CELSIUS J550 Operating Manual page 57

Removing a drive
► Remove the casing cover (see Chapter
► Fold out the drive cage (see chapter
► Disconnect any cables connected to the drive.
► Slightly press together the EasyChange rails on the drive (1).
► Push the drive a few centimetres out of the bay in the direction of the arrow (2).
► Pull the drive completely out of the bay in the direction of the arrow (3).
► Pull the EasyChange rails off the drive.
► If you no longer need the EasyChange rails, secure them again in the lower bay.
► Fold the drive cage into the closed position again (see chapter
► Fit the casing cover back onto the casing (see Chapter
Fujitsu
"Removing the casing cover", Page
"Opening the drive cage", Page
1
2
1
"Reattaching the casing cover.", Page
System expansions
35).
46).
3
"Closing the drive cage", Page 47).
36).
53