Installing And Removing Full High Boards - Fujitsu CELSIUS J550 Operating Manual

Installing and removing full high boards

Low-profileboard
Up to two full high boards can be installed in the board carrier, which in turn is mounted
on the rear of the casing. An additional slot cover is present in the board carrier for each
individual slot. If no board is installed in the slot, a slot cover protects the slot.
When you install a board, do not discard the corresponding slot cover.
For cooling, protection against fire and in order to comply with EMC regulations,
you must refit the slot cover if you remove the board.
Fujitsu
System expansions
61