Riello Vokera VIBE MAX User Instructions page 37

7.4 INTEGRAL BLUETOOTH TIMER (EASI-
CONNECT)
Your appliance incorporates a Bluetooth time clock that
can be used -via our Easi-Connect app – to control the
heating ON/OFF time periods. NOTE: Please check
with your installer and ask whether the Bluetooth clock
is active or has been disabled, before proceeding with
the setup of the 'Easi-Connect' app.
Download the Easi-Connect app
The Easi-Connect app can be downloaded from the Apple
app store (for iOS devices), or Google Play (for Android
devices). The Easi-Connect app will work with iOS ver-
sion xx or later, or Android version xx or later.
Configure the Easi-Connect app
The Easi-Connect app is extremely intuitive and easy to
set up; however a setup guide can be accessed here if
necessary:
INSERT QR CODE HERE
• Ensure that you're smart device (phone, tablet, etc.) is
within 3-metres of your appliance and that the appliance
is switched ON
• Ensure that your smart device has Bluetooth enabled
and is in pairing mode
• Open the Easi-Connect app and follow the on screen
instructions that will guide you through the search and
connect process
• When Easi-Connect has succeeded in connecting to
your appliance, press the 'Discover' button to enter the
mode screen
Modes of Operation
• My Program: allows you to program multiple ON/OFF
schedules according to your routines; each schedule
can be edited, modified, or deleted, at any time.
• Default Program: the default program (see schedule
below) is the built-in ON/OFF heating schedules, the
default program cannot be edited, modified, or deleted.
• Always ON: the heating will be ON continuously (this
is useful if you want to have the heating ON out-with
the heating schedule).
• Always OFF: the heating will be OFF continuously (this
is useful if you want to have the heating OFF out-with
the heating schedule).
Default Program
INSERT DEFAULT SCHEDULE HERE
My Program
The 'My Program' mode, allows you to add multiple ON/
OFF heating schedules for single days, groups of days,
or all 7-days according to your requirements. Each ON
or OFF period is active for a minimum of 30-minutes.
To add or edit the heating schedule, proceed as follows:
1. From the Easi-Connect home screen, press the 'My
Program' button.
2. Choose the schedule that you wish to edit or modify,
or alternatively press the 'add schedule' button.
3. Select which days you wish to be included in the
schedule.
4. Select the Start time and the End time that you wish
the heating schedule to be active.
5. Press the 'save schedule' button and wait 10-seconds
before returning to the home screen.
6. Select and/or enable 'My Program' as desired.
37