Adding Times To A Week Program - Lochinvar HWHC 44-370 G CE Installation, Commissioning, User & Maintenance Instructions

4.3.7
0311746_HWHC_44-63_II_ENEN_V2.6, 2022-10-17
2. Confirm with [ENTER].
The display shown in the figure will appear.
3.
If you wish, you can use [ ] to scroll to another day, and change more switch-on
(see section 4.3.6.1) and switch-off (see section 4.3.6.2) times.
4. After changing all desired switch-on and switch off times, you can start running the
week program:
Scroll with [ ] to START OPERATION.
Confirm with [ENTER].

Adding times to a week program

Call up the menu to INSERT switch-on and switch-off times into a week program as
follows:
1. [ ]: WEEK PROGRAM | PROGRAM OVERVIEW.
Confirm with [ENTER].
The display shows the menu for the week program. The cursor points to the active
period.
2.
Scroll [ ] to INSERT.
Confirm with [ENTER].
The submenu for adding a period will appear.
Example
As an example, we will program an extra period in which the switch-on time is set to
18:00 and the corresponding switch-off time to 22:00. The water temperature will be set
to 75ºC and the pump will run continuously.
33