Week Program; Starting And Stopping The Week Program; Changing The Appliance's Standard Week Program - Lochinvar HWHC 44-370 G CE Installation, Commissioning, User & Maintenance Instructions

Ecocharger hybrid gas fired condensing water heater with intergrated coil
Table of Contents

Advertisement

4.3.3.2
4.3.4
4.3.5
4.3.6
n
30
Setting water temperature during ON mode
The water temperature can also be directly adjusted when the water heater is in ON
mode.
Simply use:
[ ] to increase the value;
[ ] to decrease the value.
Confirm with [ENTER].

Week program

Using the week program, you can set the water temperature for the days and times you
want.
If the appliance is running under a week program, then this is indicated on the display by
the text PROG on the first line (see the figure). The second line shows the time of day, the
day of the week and the temperature. The third line shows the next switching time of the
week program and the programmed temperature. The fourth line shows the text
PROGRAM ACTIVATED.
The appliance's default week program switches the appliance on every day at 00:00 and
off at 23:59. The default water temperature setting is 65 ºC.
If you want, you can change every setting in the appliance's standard week program.
If the water temperature becomes too low while the week program is running, the
appliance will run through the heating cycle (see section 4.1.1) and return to the week
program.
The following topics are covered here:
Starting and stopping the week program (see section 4.3.5)
Changing the appliance's standard week program (see section 4.3.6)
Adding times to a week program (see section 4.3.7)
Deleting times from a week program (see section 4.3.8)

Starting and stopping the week program

The week program can be started up from any other operating mode, as follows:
1.
[
]: WEEK PROGRAM | START OPERATION
Confirm with [ENTER].
A week program can be shut down simply by activating a different operating mode, for
example the ON mode.

Changing the appliance's standard week program

Note
First fill-in the desired week program on the supplied week program card.
A week program is made up of a number of programmable periods in which you can have
the appliance switch on and off. A period consists of:
switch-on time: day of the week, hours and minutes
switch-off time: hours and minutes
the water temperature setting
User part

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hwhc 44-370 pg ceHwhc 63-370 g ceHwhc 63-370 pg ce

Table of Contents