HP VXI E1476A User's Manual And Programming Manual page 64

Note
Example
Chapter 3
Clearing the interface using a Ctrl-c from the terminal during a scan leaves the last
channel it closed in the closed position and does not set the "scan complete" status
bit.
•
Related Commands:
Stopping a Scan with ABORt
TRIG:SOUR BUS
INIT:CONT ON
SCAN (@100:115)
INIT
.
.
ABOR
ARM, INITiate:CONTinuous, [ROUTe:]SCAN, TRIGger
Bus is trigger source.
Set continuous scanning.
Set channel list.
Start scanning cycle.
Abort scan in progress.
HP E1476A Switchbox Command Reference 63