Table of Contents
Advertisement
Connecting User Inputs
Chapter 1
The HP E1476A consists of a switch module and a Terminal Module. The
user connects inputs to the Multiplexer's H, L and G terminal connections on
the Terminal Module. "Figure 1-1. HP E1476A Simplified Schematic" on
page 15 shows a simplified schematic for both the Multiplexer and the
Terminal Module. Figure 1-12 shows the Multiplexer's front panel and the
connector pin-out which mates to the Terminal Module and Figure 1-13
shows the pinout of the Option A3F Connector.
Figure 1-12. HP E1476A Multiplexer Pin-out
HP E1476A Multiplexer Setup 31
Advertisement
Table of Contents
