Table 2: Optical Module Features (80C02) - Tektronix 80C00 Series User Manual

Getting Started
2
A figure in the Operating Basics section shows the module controls, connectors,
and indicators. (See Figure 5 on page 17.)

Table 2: Optical module features (80C02)

Feature
Number of input channels
Effective wavelength range
Supported standards or data filtering rates
Clock recovery, option
Absolute maximum nondestructive optical
input 2
Internal Fiber Diameter
Optical return loss
Minimum optical bandwidth at optical
connector
Output zero
Independent channel deskew
Offset capability at front of module
Power meter
1
Some values in the table are typical.
2
The optical input powers below nondestructive levels may exceed saturation and compression limits of the module.
3
Compatible with single-mode fiber of equal or smaller diameter.
80C02 1
1
1100 nm to 1650 nm
OC-192/STM-64
OC-192/STM-64
5 mW average power; 10 mW peak power at
wavelength with highest relative responsivity
9 mm/125 μm single mode
> 30 dB typical
> 30 GHz
< 10 μW immediately after dark calibration
Standard
Standard
Standard
80C00 Series Optical Sampling Modules User Manual
3