Installing The Application Module; Gathering Equipment - Tektronix DPO3PWR User Manual

Installing the Application Module

Gathering Equipment

Use appropriate equipment, such as the following, to make your power measurements:
MSO4000 or DPO4000 Series oscilloscopes with firmware version 2.17 or higher and the DPO4PWR application module
installed.
MDO4000 Series oscilloscopes with firmware version 2.08 or higher and the DPO4PWR application module installed.
MDO3000 Series oscilloscopes with firmware version 1.10 or higher and the MDO3PWR application module installed.
MSO3000 Series oscilloscopes with firmware version 2.06 or higher and the DPO3PWR application module installed.
DPO3000 Series oscilloscopes with firmware version 1.10 or higher and the DPO3PWR application module installed.
Differential probe, such as the TDP0500, TDP1000, THDP0200, TMDP0200, P5205A
TPA-BNC Probe Adapter (when needed)
Current probe, such as the TCP0020, TCP0030A, TCP0150 or TCP202A
TEK-DPG Deskew Pulse Generator
067-1686-XX Power Measurement Deskew and Calibration Fixture
DPO3PWR, MDO3PWR and DPO4PWR Power Analysis Modules User Manual
Installing the Application Module
1