Errors And Warnings - Skyrc B6neo Instruction Manual

Errors and Warnings

In the event of a fault, B6neo will display an error message.
Error Message
DC In Too Low!
DC In Too High!
Connection Break!
Cell Error
Battery Type!
Overcharge Capacity Limit!
Over Time Limit!
Int.Temp.Too High!
Over Load!
Reversed Polarity
Fully Charged
Outlet Volt. Too Low!
Outlet Overload!
Balance Connection Error!
Cell Volt Diff.
Set Power Errow
Explanation
DC input voltage is lower than preset!
DC input voltage is higher than preset!
The battery may be broken!
The cells do not match.
The battery type is wrong!
The charged capacity reaches the preset capacity limit.
The program is timed out!
The internal temperature is high!
The charger is overloaded!
The battery connection is reversed.
The battery is fully charged already!
The DC output voltage is too low.
The DC output is overloaded.
The balance connection is interrupted.
The voltage difference between each cell is high.
There is an error in setting the DC power.
- 26 -