Table of Contents
Advertisement
®
FLEXCUT
125 CCC
CONTROLS AND SETTINGS
FIGURE B.2 - Front Panel
4
2
6
7
8
1. LCD Display: Shows available modes and real time parame-
ters.
2. Home Button: Allows the user to return to the Home Screen.
3. Menu Control Knob/Button: Used to navigate and select
items on the display.
4. Pressure Regulator: Allows the regulation of the primary
air/gas pressure.
5. Purge: Allows the user to enable air flow from the machine.
6. On/Off Switch: Turns the input power to the machine
ON/OFF.
7. Torch Connection: Connect the torch.
8. Work Lead Connection: Connect cable with work clamp.
FIGURE B.3 - Back Panel
12
1
3
5
9. Input Cord Strain Relief: Used to connect the unit to input
power.
10. Reconnect Panel Access: Allows the unit to be configured
for 380, 460, or 575 VAC input.
11. 14-pin CNC Interface: Allows access to Arc Start Trigger,
Arc Initiated contact, raw or divided Arc Voltage, and
Forced Mark.
12. Air or Gas Inlet: Compressed air or gas connection.
B-2
OPERATION
9
10
11
Advertisement
Table of Contents
