Troubleshooting - Lincoln Electric FlexCut 125 CCC Operator's Manual

®
FLEXCUT 125 CCC
HOW TO USE TROUBLESHOOTING GUIDE
Service and Repair should only be performed by Lincoln Electric Factory Trained Personnel. Unauthorized
repairs performed on this equipment may result in danger to the technician and machine operator and will
invalidate your factory warranty. For your safety and to avoid Electrical Shock, please observe all safety notes
and precautions detailed throughout this
manual.
__________________________________________________________________________
This Troubleshooting Guide is provided to help you
locate and repair possible machine malfunctions.
Simply follow the three-step procedure listed below.
Step 1. LOCATE PROBLEM (SYMPTOM).
Look under the column labeled "PROBLEM (SYMP-
TOMS)." This column describes possible symptoms
that the machine may exhibit. Find the listing that
best describes the symptom that the machine is
exhibiting.
Step 2. POSSIBLE CAUSE.
The second column labeled "POSSIBLE CAUSE" lists
the obvious external possibilities that may contribute
to the machine symptom.
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized
Field Service Facility for technical troubleshooting assistance before you proceed.

TROUBLESHOOTING

WARNING
WARNING
ELECTRIC SHOCK CAN KILL.
• Turn off machine at the disconnect switch on
the rear of the machine and remove main
power supply connections before doing any
troubleshooting.
------------------------------------------------------------------------
CAUTION
Step 3. RECOMMENDED COURSE OF ACTION
This column provides a course of action for the
Possible Cause, generally it states to contact you
local Lincoln Authorized Field Service Facility.
If you do not understand or are unable to perform
the Recommended Course of Action safely, contact
you local Lincoln Authorized Field Service Facility.
E-1
TROUBLESHOOTING