Capacitive Touchscreen - Planar LC1713R User Manual

Projected Capacitive Touchscreen
LC 1913RTZ-C with touchscreen and side mounted cooling kit
The LC17 and LC19 monitors are available with projected capacitive touch. Projected capacitive is
designed to be installed in outdoor applications where rain, splashing liquids, dust, and vandalism
are environmental challenges. The sensors are located behind the protective glass layer, whereas
traditional capacitive technology employs ITO on the touched surface. Gloved hand use is OK.
Set Up
1. Refer to Planar mechanical outline drawing for the mounting hole locations
(Drawing #076-0655-00)
2. Connect the USB cable from display to USB port on computer
3. Power on computer and install touchscreen driver
(found on http://www.planar.com/support/Support_By_Product.htm)
Technical Data
• Surface: Glass
• Optical Clarity: as high as 91%
• Surface Scratch Hardness: Mohs Hardness Rating of 5.5
• Interface: USB
For more information on projected capacitive touch products, visit
http://www.zytronic.co.uk/touchscreens_zytouch.htm
LC17 and LC19 User's Guide
P
25
(020-0599-00B)